Our Refrigerated Trailers

Trailer Specifications

Move your mouse over the text to view the corresponding specification photo

• Chassis is constructed of welded steel beams and hot-dip galvanised
  
• Auto-reverse independent braking system T.U.V approved
  
• Rubber torsion beam axle with independent suspension on all wheels
  
• Recyclable impact-proof thermo-plastic mudguards
  
• Patented quick-release 50mm ball-headed coupling by Bradley for single-handed operation and ease of use.
  
• Bradley jockey wheel
  
• Body panels are vacuum bonded, multi-element construction with a high gloss GRP laminate offered to both interior and exterior surfaces. These are insulated using 75mm RTM Styrofoam
  
• Flooring is 97mm overall and, again, is insulated, this is sandwiched between 6 and 12mm ply and sealed with NON Slip GRP medium grade
  
• The door frame and all door furniture ie locks, hinges and fittings are all constructed from high grade stainless steel
  
• Rear double doors are shown here with an option to change to single pallet leaf door
  
• 12v internal lighting operated from exterior refrigeration control panel
  
• Corner Steadies
  
• Twin axle fitted with steel wheels
  
• Flexible side lights to reduce the risk of breakages
  
• Lockable Door
  

Refrigeration Unit Specifications

• Zanotti 'Uniblock AS-R are monoblock units, trough wall mounting type
• The main characteristic is the casing and the refrigerating system suitable for outside use without any particular protection against atmospheric agents
• The refrigerating unit is equipped with hermetic compressors, complete with crankcase heater, double solenoid valve and system to control the condensing pressure (pressure switch for condensor fans for models 121-123-221-135, or electronic speed regulator for models 235-335-340)
• Defrost is trough hot gas injection, expansion through capillary tube. The refrigerant used is R404A
• The casing is especially built to protect at the maximum level the internal refrigerating system; the air inlet of the condensor comes from the lower part of the unit while the air outlets is from the front part.
• The unit is controlled by an electronic card which controls all functions and it is protected by a lockable door. TO simplify the electrical connections, the unit is fitted with an external socket-plug
• Airthrow = 4m